Adsorption of ammonia from anaerobic digester effluent by magnetically modified zeolite (MMZ) has been investigated using a batch technique and comparison of adsorption isotherm equations. Adsorption isotherm models were utilized to describe the equilibrium isotherms and the isotherm constants were calculated. The sorption of ammonia follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) m...

Parameters from single-component isotherm models were used in multicomponent isotherm models to predict the aqueous phase sorption of trichloroethylene (TCE) in the presence of tetrachloroethylene (PCE) in four zeolites, Tenax, and three natural solids. The Langmuir, the Polanyi-Dubinin, and the Freundlich or the Langmuir-Freundlich isotherm models were used to simulate single-component sorptio...

Adsorption characteristics of potentially toxic metals in single- and multi-metal forms onto ferronickel slag were evaluated. Competitive sorption of metals by ferronickel slag has never been reported previously. The maximum adsorption capacities of toxic metals on ferronickel were in the order of Cd (10.2 mg g(-1)) > Cu (8.4 mg g(-1)) > Zn (4.4 mg g(-1)) in the single-metal adsorption isotherm...

Adsorption plays an important role in water and wastewater treatment. The analysis and design of processes that involve adsorption rely on the availability of isotherms that describe these adsorption processes. Adsorption isotherms are usually estimated empirically from measurements of the adsorption process variables. Unfortunately, these measurements are usually contaminated with errors that ...

Water pollution caused by the lead(II) from the spent liquor has caught much attention. The research from the theoretical model to application fundaments is of vital importance. In this study, lead(II) adsorption isotherms are investigated using a series of hybrid membranes containing mercapto groups (-SH groups) as the hybrid adsorbents. To determine the best fitting equation, the experimental...

Polyaniline titanotungstate (PATiW) was synthesized by the sol-gel method. Adsorption isotherm studies of Cs from aqueous solution are described. Elemental Composition, chemical solubility, ion-exchange capacity (IEC) and pH titration are studied. Distribution coefficients (Kd) for ten metal ions have been determined. It was found that the polyaniline titanotungstate has high affinity and high ...

Analytical isotherm equations such as Langmuir and Freundlich isotherms are widely used for modeling adsorption data. However, these isotherms are primarily useful for simulating data collected at a fixed pH value and cannot be easily adapted to simulate pH-dependent adsorption effects. Therefore, most adsorption studies currently use numerical surface-complexation models (SCMs), which are more...

The isothermal adsorption of nicotine from an aqueous solution onto zeolite type USY at temperature range from 298 to 322 K was investigated. It was found that the adsorption isotherms can be described by the Freundlich adsorption isotherm. The density distribution function of adsorption centers has an exponential form and the adsorption isotherms can be fitted by the Freundlich isotherm. The c...

The occurrence of microcystins (MC) during aquatic blooms of cyanobacteria in eutrophicated freshwater body has increasingly become an environmental and health concern worldwide. An experimental study was conducted to investigate the adsorption of two common variants of microcystins, MCLR and MCLW, onto SPM at different pH values. The results showed that most microcystins spiked into an SPM sol...